ASP Developer Network - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com

ASPDeveloper

ASPDeveloper.Net / VirtualServerFAQ.COM

Make sure you go to our home page for:

* Virtual Server 2005 FAQ
* ASP.Net 2.0 Information
* ASP.Net 2.0 Streaming Tutorials
* ASP.Net 2.0 HTML based Tutorials

Made possible by Business Internet Technology Shop (BitShop)

Virtual Server 2005

Recent Virtual Server 2005 posts

* VMM 2007 virtual switching
* Hyper-V and USB
* Hyper-v - windows 2008 gui 64 bit - what other roles to add
* openSuSE and Virtual Server 2005
* Memory on Windows 2003 Standard/VS
* Hyper-V and DOS
* Pagefile on VM"s
* Add Public IP address
* Hyper-V and SCVMM resource control
* Hyper-V VM Pagefile
* hyper-v remote admin
* Virtual Server vs. all software in a single image.
* Hyper-V Server 2008 RPC is not running
* Hyper V best practices and questions
* can i run a 32bit windows 2008 to manage 64bit hyper-V ?
* Use of Virtual Server Technology for backups...
* Hyper-V networking
* Migration Fails
* Running W7 in VSRV 2005 R2
* New Virtual Server user question

Add Solution

Hyper-V Server Update Problem

Source: microsoft.public.virtualserver
Sent: 01/17/2009
From: Jonathan
Message:

I'm using hyper-v server 2008 which is core server. This means my options
are limited and there is no GUI.

When I run option 6 to update Windows I find one update that needs to be
installed. The update is dialogue goes this way:

1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830)
Would you like to download and install updates now? (Y/N)

I select y for yes and get the following response in the cmd prompt:

Downloading updates...
Installing updates...
Listing of updates installed and individual installation results:
1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830):
Failed
Installation Results: Failed
Restart Required: False
Press return to continue...

I have restarted the server and even downloaded the KB to the C: drive and
executed it through the command prompt. I have stopped the Cryptographic
Services Service and renamed the Catroot2 folder rebooted. None of these
solutions have worked. Any suggestions?

-Jonathan

Post Reply | This is Spam! | Mark as Spam

Related Messages

Re: Hyper-V Server Update Problem

Sent: 01/17/2009
From: "Charlie Russel - MVP" <(email address - cut out)>
Message:

Ignore the update. It's one that requires you to answer yes to a separate
EULA and that's what's causing the problem, almost certainly. Or, run in a
WSUS environment where you've pre-approved any EULAs.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Jonathan" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

> I'm using hyper-v server 2008 which is core server. This means my options
> are limited and there is no GUI.
>
> When I run option 6 to update Windows I find one update that needs to be
> installed. The update is dialogue goes this way:
>
> 1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830)
> Would you like to download and install updates now? (Y/N)
>
> I select y for yes and get the following response in the cmd prompt:
>
> Downloading updates...
> Installing updates...
> Listing of updates installed and individual installation results:
> 1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830):
> Failed
> Installation Results: Failed
> Restart Required: False
> Press return to continue...
>
> I have restarted the server and even downloaded the KB to the C: drive and
> executed it through the command prompt. I have stopped the Cryptographic
> Services Service and renamed the Catroot2 folder rebooted. None of these
> solutions have worked. Any suggestions?
>
> -Jonathan
>
>

Re: Hyper-V Server Update Problem

Sent: 01/17/2009
From: Jonathan
Message:

How do I ignore the update from the command line. I don't have a GUI in this
core installation.

"Charlie Russel - MVP" wrote:

Show quoted text

> Ignore the update. It's one that requires you to answer yes to a separate
> EULA and that's what's causing the problem, almost certainly. Or, run in a
> WSUS environment where you've pre-approved any EULAs.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Jonathan" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
> > I'm using hyper-v server 2008 which is core server. This means my options
> > are limited and there is no GUI.
> >
> > When I run option 6 to update Windows I find one update that needs to be
> > installed. The update is dialogue goes this way:
> >
> > 1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830)
> > Would you like to download and install updates now? (Y/N)
> >
> > I select y for yes and get the following response in the cmd prompt:
> >
> > Downloading updates...
> > Installing updates...
> > Listing of updates installed and individual installation results:
> > 1> Windows Malicious Software Removal Tool x64 - January 2009 (KB890830):
> > Failed
> > Installation Results: Failed
> > Restart Required: False
> > Press return to continue...
> >
> > I have restarted the server and even downloaded the KB to the C: drive and
> > executed it through the command prompt. I have stopped the Cryptographic
> > Services Service and renamed the Catroot2 folder rebooted. None of these
> > solutions have worked. Any suggestions?
> >
> > -Jonathan
> >
> >
>
>

Re: Hyper-V Server Update Problem

Sent: 01/17/2009
From: "Charlie Russel - MVP" <(email address - cut out)>
Message:

Got me. I'd just let it fail and pay no attention. Not sure what the command
line is on this, there _should_ be a way to ignore an update or even to
properly acknowledge a EULA, but I don't know what it would be.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Jonathan" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

> How do I ignore the update from the command line. I don't have a GUI in
> this
> core installation.
>
> "Charlie Russel - MVP" wrote:
>
>> Ignore the update. It's one that requires you to answer yes to a separate
>> EULA and that's what's causing the problem, almost certainly. Or, run in
>> a
>> WSUS environment where you've pre-approved any EULAs.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Jonathan" <(email address - cut out)> wrote in message
>> news:(email address - cut out)...
>> > I'm using hyper-v server 2008 which is core server. This means my
>> > options
>> > are limited and there is no GUI.
>> >
>> > When I run option 6 to update Windows I find one update that needs to
>> > be
>> > installed. The update is dialogue goes this way:
>> >
>> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>> > (KB890830)
>> > Would you like to download and install updates now? (Y/N)
>> >
>> > I select y for yes and get the following response in the cmd prompt:
>> >
>> > Downloading updates...
>> > Installing updates...
>> > Listing of updates installed and individual installation results:
>> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>> > (KB890830):
>> > Failed
>> > Installation Results: Failed
>> > Restart Required: False
>> > Press return to continue...
>> >
>> > I have restarted the server and even downloaded the KB to the C: drive
>> > and
>> > executed it through the command prompt. I have stopped the
>> > Cryptographic
>> > Services Service and renamed the Catroot2 folder rebooted. None of
>> > these
>> > solutions have worked. Any suggestions?
>> >
>> > -Jonathan
>> >
>> >
>>
>>

Re: Hyper-V Server Update Problem

Sent: 01/17/2009
From: Jonathan
Message:

OK... I guess my question is will it move past that update to install
additonal updates as they become available, or do I need to somehow mark that
update as ignored so it doesn't show up anymore.

-Jonathan

"Charlie Russel - MVP" wrote:

Show quoted text

> Got me. I'd just let it fail and pay no attention. Not sure what the command
> line is on this, there _should_ be a way to ignore an update or even to
> properly acknowledge a EULA, but I don't know what it would be.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Jonathan" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
> > How do I ignore the update from the command line. I don't have a GUI in
> > this
> > core installation.
> >
> > "Charlie Russel - MVP" wrote:
> >
> >> Ignore the update. It's one that requires you to answer yes to a separate
> >> EULA and that's what's causing the problem, almost certainly. Or, run in
> >> a
> >> WSUS environment where you've pre-approved any EULAs.
> >>
> >> --
> >> Charlie.
> >> http://msmvps.com/blogs/xperts64
> >> http://mvp.support.microsoft.com/profile/charlie.russel
> >>
> >> "Jonathan" <(email address - cut out)> wrote in message
> >> news:(email address - cut out)...
> >> > I'm using hyper-v server 2008 which is core server. This means my
> >> > options
> >> > are limited and there is no GUI.
> >> >
> >> > When I run option 6 to update Windows I find one update that needs to
> >> > be
> >> > installed. The update is dialogue goes this way:
> >> >
> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
> >> > (KB890830)
> >> > Would you like to download and install updates now? (Y/N)
> >> >
> >> > I select y for yes and get the following response in the cmd prompt:
> >> >
> >> > Downloading updates...
> >> > Installing updates...
> >> > Listing of updates installed and individual installation results:
> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
> >> > (KB890830):
> >> > Failed
> >> > Installation Results: Failed
> >> > Restart Required: False
> >> > Press return to continue...
> >> >
> >> > I have restarted the server and even downloaded the KB to the C: drive
> >> > and
> >> > executed it through the command prompt. I have stopped the
> >> > Cryptographic
> >> > Services Service and renamed the Catroot2 folder rebooted. None of
> >> > these
> >> > solutions have worked. Any suggestions?
> >> >
> >> > -Jonathan
> >> >
> >> >
> >>
> >>
>
>

Re: Hyper-V Server Update Problem

Sent: 01/17/2009
From: "Charlie Russel - MVP" <(email address - cut out)>
Message:

If it works like every other MS update, it will keep failing on that one
until it's replaced by the next month's version, and that won't impact other
updates at all.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Jonathan" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

> OK... I guess my question is will it move past that update to install
> additonal updates as they become available, or do I need to somehow mark
> that
> update as ignored so it doesn't show up anymore.
>
> -Jonathan
>
> "Charlie Russel - MVP" wrote:
>
>> Got me. I'd just let it fail and pay no attention. Not sure what the
>> command
>> line is on this, there _should_ be a way to ignore an update or even to
>> properly acknowledge a EULA, but I don't know what it would be.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Jonathan" <(email address - cut out)> wrote in message
>> news:(email address - cut out)...
>> > How do I ignore the update from the command line. I don't have a GUI
>> > in
>> > this
>> > core installation.
>> >
>> > "Charlie Russel - MVP" wrote:
>> >
>> >> Ignore the update. It's one that requires you to answer yes to a
>> >> separate
>> >> EULA and that's what's causing the problem, almost certainly. Or, run
>> >> in
>> >> a
>> >> WSUS environment where you've pre-approved any EULAs.
>> >>
>> >> --
>> >> Charlie.
>> >> http://msmvps.com/blogs/xperts64
>> >> http://mvp.support.microsoft.com/profile/charlie.russel
>> >>
>> >> "Jonathan" <(email address - cut out)> wrote in message
>> >> news:(email address - cut out)...
>> >> > I'm using hyper-v server 2008 which is core server. This means my
>> >> > options
>> >> > are limited and there is no GUI.
>> >> >
>> >> > When I run option 6 to update Windows I find one update that needs
>> >> > to
>> >> > be
>> >> > installed. The update is dialogue goes this way:
>> >> >
>> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>> >> > (KB890830)
>> >> > Would you like to download and install updates now? (Y/N)
>> >> >
>> >> > I select y for yes and get the following response in the cmd prompt:
>> >> >
>> >> > Downloading updates...
>> >> > Installing updates...
>> >> > Listing of updates installed and individual installation results:
>> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>> >> > (KB890830):
>> >> > Failed
>> >> > Installation Results: Failed
>> >> > Restart Required: False
>> >> > Press return to continue...
>> >> >
>> >> > I have restarted the server and even downloaded the KB to the C:
>> >> > drive
>> >> > and
>> >> > executed it through the command prompt. I have stopped the
>> >> > Cryptographic
>> >> > Services Service and renamed the Catroot2 folder rebooted. None of
>> >> > these
>> >> > solutions have worked. Any suggestions?
>> >> >
>> >> > -Jonathan
>> >> >
>> >> >
>> >>
>> >>
>>
>>

Re: Hyper-V Server Update Problem

Sent: 01/19/2009
From: "Charlie Russel - MVP" <(email address - cut out)>
Message:

Update: The problem has been reported to MS and they will be trying to repro
it. Thanks for reporting it.

--
Charlie.
http://msmvps.com/blogs/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel

"Jonathan" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

Re: Hyper-V Server Update Problem

Sent: 01/20/2009
From: "Ryan Sokolowski [MVP]" <(email address - cut out)>
Message:

I'd also recommend that you consider establishing a separate system for
performing management of your GUI-less Server Core systems - this will make
things much easier for you in the long run.

--
Ryan Sokolowski
MVP - Clustering
MCT, MCITP x3, MCTS x8, MCSE x2, CCNA, CCDA, BCFP

"Charlie Russel - MVP" <(email address - cut out)> wrote in message
news:(email address - cut out)...

Show quoted text

> Update: The problem has been reported to MS and they will be trying to
> repro it. Thanks for reporting it.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Jonathan" <(email address - cut out)> wrote in message
> news:(email address - cut out)...
>> OK... I guess my question is will it move past that update to install
>> additonal updates as they become available, or do I need to somehow mark
>> that
>> update as ignored so it doesn't show up anymore.
>>
>> -Jonathan
>>
>> "Charlie Russel - MVP" wrote:
>>
>>> Got me. I'd just let it fail and pay no attention. Not sure what the
>>> command
>>> line is on this, there _should_ be a way to ignore an update or even to
>>> properly acknowledge a EULA, but I don't know what it would be.
>>>
>>> --
>>> Charlie.
>>> http://msmvps.com/blogs/xperts64
>>> http://mvp.support.microsoft.com/profile/charlie.russel
>>>
>>> "Jonathan" <(email address - cut out)> wrote in message
>>> news:(email address - cut out)...
>>> > How do I ignore the update from the command line. I don't have a GUI
>>> > in
>>> > this
>>> > core installation.
>>> >
>>> > "Charlie Russel - MVP" wrote:
>>> >
>>> >> Ignore the update. It's one that requires you to answer yes to a
>>> >> separate
>>> >> EULA and that's what's causing the problem, almost certainly. Or, run
>>> >> in
>>> >> a
>>> >> WSUS environment where you've pre-approved any EULAs.
>>> >>
>>> >> --
>>> >> Charlie.
>>> >> http://msmvps.com/blogs/xperts64
>>> >> http://mvp.support.microsoft.com/profile/charlie.russel
>>> >>
>>> >> "Jonathan" <(email address - cut out)> wrote in message
>>> >> news:(email address - cut out)...
>>> >> > I'm using hyper-v server 2008 which is core server. This means my
>>> >> > options
>>> >> > are limited and there is no GUI.
>>> >> >
>>> >> > When I run option 6 to update Windows I find one update that needs
>>> >> > to
>>> >> > be
>>> >> > installed. The update is dialogue goes this way:
>>> >> >
>>> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>>> >> > (KB890830)
>>> >> > Would you like to download and install updates now? (Y/N)
>>> >> >
>>> >> > I select y for yes and get the following response in the cmd
>>> >> > prompt:
>>> >> >
>>> >> > Downloading updates...
>>> >> > Installing updates...
>>> >> > Listing of updates installed and individual installation results:
>>> >> > 1> Windows Malicious Software Removal Tool x64 - January 2009
>>> >> > (KB890830):
>>> >> > Failed
>>> >> > Installation Results: Failed
>>> >> > Restart Required: False
>>> >> > Press return to continue...
>>> >> >
>>> >> > I have restarted the server and even downloaded the KB to the C:
>>> >> > drive
>>> >> > and
>>> >> > executed it through the command prompt. I have stopped the
>>> >> > Cryptographic
>>> >> > Services Service and renamed the Catroot2 folder rebooted. None of
>>> >> > these
>>> >> > solutions have worked. Any suggestions?
>>> >> >
>>> >> > -Jonathan
>>> >> >
>>> >> >
>>> >>
>>> >>
>>>
>>>
>

Post Reply | This is Spam! | Mark as Spam

Other groups

Virtual PC (Mac)(3592)	Virtual PC(12844)	Virtual PC (French)(496)
Virtual Server 2005(6245)

Our Sponsors

Virtual Server 2005 Info Here!
http://www.aspdeveloper.net

Wiki

Blogs

Articles

Image galleries

File galleries

Forums

Maps

Directories

ASP Developer Network (since 1996) - Brought to you by Steve Radich and BitShop, Inc. - http://www.bitshop.com
Copyright © 1997-2005 by BitShop, Inc. All Rights Reserved.
No content may be reproduced in any form without written permission from BitShop, Inc.
We will be honored to assist with reproduction rights on our material if you contact us.
We also can provide print articles for your magazine, private training seminars at your site, and conference presentations.
Thank you for visiting. Please bookmark our site if you found it useful!
If you wish to make a donation it will help further the development of these free resources: